Kemppi FreshAir Flow Control unit Manual de usuario descargar pdf (Pagina 10)

10 FreshAir Flow Control

4.5 Checking the lter

Press and hold the right button (+) for more than 1 second. The more yellow

LED diodes come on, the more clogged the lter is.

> 1 s

After releasing the buttons, the LED diodes return to the green light state

indicating the current airow.

5. MAINTENANCE

It is recommended to clean the respiratory system after each use. Also

inspect all parts and replace any which are damaged or worn.

• Always clean the respiratory unit in a ventilated room or outside. Be

aware of harmful dust settled on any parts of the unit.

• Never use ammable cleaning liquids or abrasive cleaners!

• The outer surface of the blower unit can be cleaned with a soft cloth

and mild detergent solution. The unit must be completely dry before

assembling the ller and cover.

• Ensure that no water or detergents enter the blower unit!

• The air hose itself, detached from the blower unit and the headpiece,

can be rinsed in clean water.

6. SPARE PARTS

6.1 About the lters

The respiratory power unit is equipped with a high eciency particle lter of

class PSL R.

The lter must be checked regularly and replaced when necessary. See

section 4.2: "Air ow test".

Make sure that the new lter is within its expiry date, unused and not

noticeably damaged.

From the hygienic point of view the maximum working time of a lter is 180

hours and should not be exceeded.

Never clean the lter by any procedure!

10 FreshAir Flow Control

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Sin comentarios

Kemppi FreshAir Flow Control unit Manual de usuario Pagina 10